A heavy duty, adjustable, automatic
door bottom seal that is spring loaded
to lift clear of the floor when the door
is opened. Ideal for butt hinged doors
with large gaps such as where internal
access ramps are used and large
clearances are necessary. The RP92Si
can accommodate ramped floors/sills
with gradients up to 1:8 and utilises an
aesthetic extruded aluminium cover
for concealed fixing.
-
Location:Face mounted on the
bottom of timber or metal single and
double butt hinged doors.
-
Min/Max Gap:25mm to 55mm.
Larger gaps can be accommodated
if set lower on the door bottom and
smaller gaps if set higher on the door
bottom (user determined).
-
Finish:Satin clear (silver) anodised
aluminium (15µm) with black
anodised inner.
-
Fixing:Concealed screw fix.
Adhesive striker plate, escutcheon
plates and zinc plated, cross recess
head S.T. screws supplied.
- Seal:RP347Si. Black silicon rubber (SE).
-
Sizes:1200mm, 1070mm, 920mm,
820mm to 600mm(min). Seals cut
back to exact size.
-
Access & Mobility AUS/NZ:NCC D3,
D3.2. Designed with high efficiency
mechanism to assist with the closing
force requirements detailed in
AS1428.1.
- UK/EU:Approved Document M.
-
FireGasket flammability index 1
when tested to AS1530.2.
-
Smoke AUS/NZ: NCC Spec. C3.4. NZ
BC Compliance Doc. C/AS1 6.19.2(b).
- UK/EU:Approved Document B.
- EnergyNCC Pt. 3.12.3.3 & J3.4.
-
Durability Tested to over 1,000,000
operating cycles without failure.