Combined intumescent smoke and
fire seals which are heat activated. It
is unobtrusively set into a machined
groove (10x6mm) around the
perimeter of timber frame or door
edges. Dependent on application,
fire ratings of one to four hours
have been certified by fire door
manufacturers using RP76 and
RP76Si intumescent fire and smoke
seals.
RP76 utilises a woven pile
polypropylene ambient (cold) smoke
seal.
RP76Si utilises a pair of silicon fins
to achieve a medium temperature
smoke seal.
-
Location:Morticed into the door
frame and around stiles and head.
- Min/Max Gap:4mm to 5mm.
-
Finish:Cranberry red rigid PVC
holder with intumescent infill.
-
Fixing:Self adhesive into a 10mm x
6mm groove. Note: Contact surface
must be clean, smooth and if painted,
well cured.
-
Seal:RP371Si. Grey silicon rubber
(SE) medium temperature smoke
seal.
- Sizes: 2100mm.
-
FireGasket flammability index 1
when tested to AS1530.2.
-
SmokeNCC Spec. C3.4. AS1530.7 &
BS EN 1634-3. Meets smoke leakage
rates specified in AS6905 & EN 13501-
2 “Sa”, “Sm”.