A heavy duty medium temperature
smoke door bottom seal. The seal
is achieved by a pair of nylon brush
strips with a medium temperature
smoke barrier.
The seal can be checked out or
drilled to accommodate the pivot,
thereby providing a continuous seal.
Can be used in conjunction with
RP130Si, other Raven perimeter seals
and threshold plates.
-
Location:Bottom of double butt
hinged or centre pivot double acting
doors.
- Min/Max Gap:15mm to 18mm.
-
Finish:Satin clear (silver) anodised
aluminium (15µm) or paint at extra
cost.
-
Fixing: Screw fix. Zinc plated, cross
recess head S.T. screws supplied.
-
Seal: RP52F. Black fine and dense
nylon filaments, UV stabilised
medium temperature smoke barrier
fin and galvanised steel spine.
- Sizes:Available in stock lengths.
- Cert. GVYI.R37913
- Acoustic AUS/NZ:NCC Spec. F5.5
-
UK/EU:Approved Document E. Rated
to BS EN ISO 717-1.
-
Fire Brush Strip flammability index 1
when tested to AS1530.2.
-
Smoke AUS/NZ:NCC Spec. C3.4. NZ
BC Compliance Doc. C/AS1 6.19.2(b).
AS1530.7 & BS EN 1634-3 (similar to
BS 476 section 31.1). Meets smoke
leakage rates specified in AS6905 &
EN 13501-2 “Sa”, “Sm”.
- EnergyNCC Pt. 3.12.3.3 & J3.4.
-
DurabilityTested to over 1,000,000
operating cycles without failure.
- when used on a garage in
accordance with AS 3959.